Alarm Lock DL 3000 Uživatelská příručka stáhnout pdf (Strana 22)

Connect the AL-PCI2 cable's DB-9 connector to a Serial Port at

the rear of your PC (if your computer does not have an available

Serial Port, a USB adapter is available – refer to Product Com-

munication Examples section in this manual). Connect the

other end of the AL-PCI2 cable to the lock, observing tab direc-

tion (tab to black socket). The comm port setup is covered in

the rear of this manual.

1. In DL-Windows, click the Comm button on the DL-Windows

toolbar and select Send to Lock.

2. The Send to Lock dialog box appears:

3. Start the communication at the lock keypad by either press-

ing the special function User 298 User Code at the keypad

or by entering Program Mode and accessing Function 58,

then click the Start button in DL-Windows.

"Verifying Lock Type" appears in the status window located

at the lower left corner of the Send to Lock dialog box (see

image below).

4. The Model Type, Lock Firmware Version and LockID # will

display on the screen. Verify that this information is correct.

5. If “Communicating” is not displayed after Step 3 (as shown in

the image below), then communications have failed. Check

the following:

a. COM Port Selection

b. Cable Connections

6. After the selected data transfer is complete, verify that the

message "Send To Lock Successful" is displayed in the

status window of the Send to Lock dialog box.

Deselecting All allows you to send any combination of avail-

able data, i.e. only User Codes and Schedules, Features,

Update Group Status, Time and Date or in any combination.

• All - Sends the complete program to the lock.

• Users - Sends all User Information including User Enable/

Disable status, User Codes, Group Assignments, and

Level Assignments (DL2800/ DL3000 only)

• Schedule - Sends all schedules (see Schedule section for

more details)

• Features - Sends all features chosen in the Features

screen (see Features section for more details)

• Update Group Status - Updates the Enabled/ Disabled

status of Groups

• Time/ Date - Sends the PCs current time and date.

Receiving data from the lock is equally as simple, as described

in the following section.

Sending Data directly to the Lock from the PC

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 55 56

Komentáře k této Příručce

Žádné komentáře

Alarm Lock DL 3000 Uživatelská příručka Strana 22

Komentáře k této Příručce

Související produkty a manuály pro Bezpečnostní systémy pro řízení přístupu Alarm Lock DL 3000