Alarm Lock DL6100 Manuál s instrukcemi Strana 17
- Strana / 36
- Tabulka s obsahem
- KNIHY
Hodnocené. / 5. Na základě hodnocení zákazníků
17
; 1 2 ; 0 0 0 :
12. Clear All Schedules and Timeout Functions
Function 12 clears all programmed Schedules and all Timeout Functions. (To clear All Timeout Functions only, see
Function 13 below). Function 12 will clear all of the following: All Schedule Functions 72 through 93, Timeout Functions
5, 25 through 34 and Function 47. Note: Function 12 also resets Passage Mode and any disabled Groups. After using
Function 12, your Scheduled/Timeout features must be manually re-programmed.
NOTE: Up to 4 Timeout Functions may be pending at any one time. An error beep will sound when attempting to
program more than 4 Timeout Functions. This Function only disables the timeout; the event associated with the timeout
will remain.
3
; 1 3 ; 0 0 0 :
Function 13 clears all Timeout Functions. (To clear All Schedules and Timeout Functions, see Function 12 above).
Function 13 will clear all of the following: All Timeout Functions 5, 25-34 and Function 47. After using Function 12, your
Scheduled/Timeout features must be manually re-programmed.
NOTE: Up to 4 Timeout Functions may be pending at any one time. An error beep will sound when attempting to
program more than 4 Timeout Functions. This Function only disables the timeout; the event associated with the timeout
will remain.
3
13. Clear All Timeout Functions
(This Function enabled through keypad only)
CLEAR FUNCTIONS
Group Enable/Disable
Enter the functions below to Enable/Disable Groups. Functions 14 - 23 will each override
existing scheduled events. Therefore, Functions 14 - 23 are temporary, take effect im-
mediately, and are always overridden by future scheduled events that already exist within
the lock programming.
2
GROUPS
24. Reserved
; 1 4 :
; 1 5 :
16. Disable Group 3
; 1 6 :
17. Disable Group 4
; 1 7 :
18. Disable All Groups
; 1 8 :
19. Enable Group 1
; 1 9 :
20. Enable Group 2
; 2 0 :
21. Enable Group 3
; 2 1 :
22. Enable Group 4
; 2 2 :
23. Enable All Groups
; 2 3 :
14. Disable Group 1
15. Disable Group 2
Programming Functions (cont'd)
Important: It is the responsibility of the lock programmer to verify the proper lock/unlock conditions and Group conditions
after programming the lock with Function 12 and 13.
PRIORITY ORDER
1. Disabled Users
2. Enabled Groups
3. Disabled Groups
4. Enabled Users
The Priority Order details which Function will
take effect before ("have priority over") others.
For example, as per the list above, Enabled
Users have the lowest priority, and other Func-
tions can affect the status of these Users. Dis-
abling a Group (Functions 14-18) will take pri-
ority over the enabled Users in that Group,
disabling them. Enabling Groups (Functions
19-23) will take priority over those tasks lower
in the list, and finally disabling a User (Function
3) takes priority over all other tasks listed.
- Wireless Trilogy 1
- Programming Instructions 1
- Table of Contents 2
- DL6100 LOCK 2
- Lock Features 3
- Supported Products 4
- Lock Design Overview 5
- What is a Group? 7
- What is DL-Windows? 7
- Who are Users 297-300? 7
- Programming Levels 8
- LED and Sounder Indicators 9
- Wiring and Power Up 10
- Quick Start 11
- Quick Start (cont’d) 12
- Testing the Codes Entered 13
- Programming Functions 15
- (By User Number) 16
- PRIORITY ORDER 17
- 38. Set Date 19
- 39. Set Time 19
- 40. Set Weekday 19
- Clock Adjust 20
- Pass Time 21
- Remote Input 22
- 6 7 ; [ _ _ ] : 23
- 67. Add System Features 23
- Scheduled Passage and Group 24
- Enter Key 24
- 90. Relay Activation 26
- (Open Time Window) 26
- 91. Relay Activation 26
- (Close Time Window) 26
- Disable Radio Signal 27
- Assign a User to Two Groups 28
- (cont'd.) 29
- Function 30
- Number(s) 30
- Function Name Programming 30
- Glossary 35
- Glossary (cont'd) 36
Související produkty a manuály pro Bezpečnostní systémy pro řízení přístupu Alarm Lock DL6100
Bezpečnostní systémy pro řízení přístupu Alarm Lock Trilogy DL3000 Series Uživatelský manuál
(9 stránky)
(9 stránky)
Bezpečnostní systémy pro řízení přístupu Alarm Lock Trilogy DL3500 Manuál s instrukcemi
(36 stránky)
(36 stránky)
Bezpečnostní systémy pro řízení přístupu Alarm Lock Trilogy DK3000 Series Uživatelský manuál
(6 stránky)
(6 stránky)
Bezpečnostní systémy pro řízení přístupu Alarm Lock Trilogy DL2800 Manuál s instrukcemi
(36 stránky)
(36 stránky)
Star-dreams Stinger Solar manuales
Manuales del propietario y guías del usuario para Sensores Star-dreams Stinger Solar.
Ofrecemos 1 manuales en pdf Star-dreams Stinger Solar para descargar gratis por tipos de documentos: Manual de usuario
Komentáře k této Příručce