Alarm Lock Trilogy DL4100 Series Addendum Specifikace stáhnout pdf (Strana 31)

Reporting via net:

Napco NetLink Module, NL-MOD,

will allow Napco Gemini Panels,

from the P816 thru the X255, to fully,

securely communicate alarms, status,

supervisories, etc., pinpointed “by zone”

over the internet to the central station‘s

PC running NL-CSRCV Central Station

application software or NetLink TCP/IP

UL Receiver(s) NL-RCV-RMPCUL, below),

using secure, NIST/AES 128bit encryption.

At the central monitoring ofﬁce, the panel

module source is immediately received,

authenticated as a valid account, and

its alarm reports decoded and sent to

awaiting CS operators for disposition.

(NL-MOD is initially set using NL-

MODCONFIG, a download software utility

for programming/conﬁguring the panel

module.)

Similarly, the NET-COMM Module

supports any brand system’s alarm

reports over the net. However, NET-

COMM is an economy communicator,

driven directly by the alarm panel, or

alternate device. Again, ideal where

conventional telco reporting is not

available, it supports 5 channel reporting

codes, communicating, for example:

alarms, panics, ﬁre, telco failure, low

battery, etc. (NET-COMM is also initially

set using NL-MODCONFIG, a download

software utility for programming/

conﬁguring the panel module.)

Receiving via net:

For non-UL central station

applications and/or

LAN Intranet campuses

Napco’s NetLink™ NL-CSRCV Windows-

based software receives reports on a

standard PC, providing cost-effective,

secure internet alarm reporting without

requiring the purchase/maintenance/

upkeep of a traditional, old-fashion

proprietary receiver. It makes getting

onsite alarm reports at a security ofﬁce

quick and convenient, and transforms

their standard PC into an alarm report

receiver, locally displaying alarms, event

history (open/closes), etc. Receiving alarm

reports via internet/intranet can save

thousands of dollars versus traditional T1

phone line costs. NL-CSRCV even allows

high-speed downloading via campus LAN

& supports network-based automation

routines. (Optionally, for a turnkey

solution, NL-CSRCV/PC is the software,

above, preinstalled & preconﬁgured on a

compatible computer system.)

Put campus, retail or private security staff directly online

with their security system using their standard PC and

intranet/internet plus slash T1 phone costs

Transform an account’s security ofﬁce’s standard PC into an onsite

alarm monitoring receiver using campus or retail intranet

• Ideal in a guard station for fastest dispatches. Uniquely, NO dedicated

central station receiver required; uses a PC with Napco NetLink CS

Software (NL-CSRCV).

• Using the internet or their own intranet, instead of phone lines for alarm

reporting, can save thousands of dollars in traditional T1 phone line

costs. Saved security budget dollars can be better spent on your other

service & upgrade offerings

• Conﬁgure NetLink for primary and/or backup reporting of alarms over a TCIP/IP based

network and/or telephone lines (telco)

• Napco Gemini Security Systems with NetLink module sends encrypted alarm data by zone

(alarms, status, supervisories) through TCP/IP network, securely with dynamic IP addressing.

• Allows high-speed downloading via campus LAN; supports network-based automation

routines. (Napco panel up/downloads require PCD-WINDOWS panel software, version 4.4

or greater.)

• Receiving pinpointed alarm reports as they happen enables them to achieve fastest

possible security dispatches optimizing your customer service.

Faced with the absence and/or uncertainty of traditional telephone company telco /

land lines, with the popularity of VOiP internet telephone usage, Napco has developed

two alternative alarm panel NetLink internet reporting modules. For use in new and

retroﬁt applications, they communicate alarms over the internet or intranet over a TCP/IP

based network, securely using dynamic IP addressing, and can be used for primary and/

or backup reporting, There is a NetLink Module for use with Napco panels and/or any

brand alarm panel with receivers from PCs

running NetLink software to UL-Listed,

rack-mounted receivers for more

stringent monitoring ofﬁces.

Receiving via net:

For UL central station

receiver applications

NL-RCV-RMPCUL

Napco’s UL864/UL1610-listed NetLink™ Receiver

is an advanced, rack-mounted receiver

enabling cost-effective, secure internet alarm reporting designed to address the

increasing need for UL central stations to adopt new receiver technologies to combat

the widespread adoption of Voice-over Internet Protocol (VoIP) services, i.e., in place of

traditional telco services. While in full compliance with UL Central Station applications,

requiring primary and mirrored, backup receivers, two (2) NetLink UL Receivers can

be installed at the same cost as a single

traditional receiver. Both NetLink TCP/IP UL

Receivers interface with the conventional CS

automation system and are simply connected

to each other with a network crossover cable,

where the secondary mirrored receiver serves

as a Hot Backup, duplicate receiver. NetLink

UL TCP/IP Receivers feature two modes of

operation, Automatic Mode, where alarm

signals are sent normally to the automation

system for processing, or Manual Mode, used

when direct operator interaction is desired,

accomplished thru an easy, menu-driven

keypad-style alphanumeric interface on the

face of the receiver. Listed for UL864 (Control

Units for Fire Protective Signaling Systems)

and UL1610 (Central Station Burglar Alarm

Units).

NetLink Central Station Receiver is UL864 & UL1610 listed

NetLink: Put security staff PCs online with a standard PC

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 43 44

Komentáře k této Příručce

Žádné komentáře

Alarm Lock Trilogy DL4100 Series Addendum Specifikace Strana 31

Komentáře k této Příručce

Související produkty a manuály pro Bezpečnostní systémy pro řízení přístupu Alarm Lock Trilogy DL4100 Series Addendum