Alarm Lock Trilogy PL3000 Manuál s instrukcemi stáhnout pdf (Strana 20)

Function Card #5

IMPORTANT NOTE:

Function Cards 3 through 7 are not recognized by DL-Windows. Therefore, DL-Windows will not send the data for

Function Cards 3-7 to the AL-DTM, nor will the AL-DTM be able to send this Function Card data to the PL3000

lock. Accordingly, Function Cards are designed to be used for limited-use installations where DL-Windows will not

be used. When User Numbers are printed in the Audit log, Function Cards 3-7 will appear as User Numbers

2003-2007.

Toggles Passage Mode (Door Is Unlocked)

When Function Card #5 is presented, Passage Mode is enabled (PL3000 remains unlocked indefinitely).

When Function Card #5 is re-presented, Passage Mode is disabled, and the PL3000 re-locks and resumes its

normal operation.

Enter Passage Mode as follows:

• Present Function Card #5 to the lock. After unlocking, the green LED blinks twice, accompanied by a

beep, and a delayed red LED flash.

Exit Passage Mode as follows:

• Present Function Card #5 to the lock. After relocking, the green LED blinks twice, accompanied by a

beep, and then a red LED flash. The lock resumes its normal operation.

Function Card # 5

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 26 27 28

Žádné komentáře

Alarm Lock Trilogy PL3000 Manuál s instrukcemi Strana 20