Alarm Lock Trilogy PL3000 Manuál s instrukcemi stáhnout pdf (Strana 8)

Default User Numbers for PL3000

USER TYPE ASSIGNED TO

USER NUMBER:

(Not Used--The PL3000 does not contain a Master Number) 1

Basic User Cards (Accessible through DL-Windows only) with

no Entry Delay

2 - 11

Quick Enable User 300 (Function Card #8) 297

Quick PC Communications Card (Function Card #1) 298

AL-DTM Data Transfer Card (Function Card #2) 299

One-Time-Only Service Card (Function Card #9) 300

Basic User Cards 301-2000

Basic User Cards (Accessible through DL-Windows only) 12 - 296

• Users 2-296 can only be accessed through DL-Windows.

• User 298 is the only code that will initiate PC communications (with DL-Windows).

• User 299 is a Non-Pass Code (does not unlock the PL3000). This is the only code that will initiate data transfer with

the AL-DTM.

NOTES:

Default User Numbers

The table below displays a graphical representation of how

the internal memory of the PL3000 lock is organized. The

default settings are the original settings that were set at the

factory (the lock's original factory condition when the lock

was first taken out of its box). The default settings are per-

manently encoded within the lock's fixed memory, and when

the lock is first started, or when power is removed and re-

applied (see Wiring and Power-Up, page 11), the original

factory default settings are re-loaded and take effect.

For more information, see the explanations for User Num-

bers in the Terminology Used in this Manual section on

pages 6-7.

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 27 28

Žádné komentáře

Alarm Lock Trilogy PL3000 Manuál s instrukcemi Strana 8