Alarm Lock ETPLN Uživatelská příručka Strana 17

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 68
  • Tabulka s obsahem
  • ŘEŠENÍ PROBLÉMŮ
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 16
DL-WINDOWS™ for Trilogy Networx™ V4.0 USER'S GUIDE 17
coded to describe the state of the selected User:
Green = User entered in the lock and enabled
Red = User entered in the lock but disabled
White = User not in the lock
Double-click on a LockID Grid number to cycle through
the colors of the LockID number (from white to green to
red and back to white again) thus adding, disabling or
removing a User as needed. In this way, the LockID
Grid can be used to add a User to any lock in an Ac-
count. One or multiple Users can also be added to one
or more locks via the right-click menu in the User Name
list.
Select a Range of Users
To select a range of Users, click to select the first User,
press and hold the SHIFT key, then click the last User in
the range (you can also press CTRL and click individual
Users). Within the range of Users highlighted, right-click
in the highlighted area to display the menu as shown in
the "SELECT A RANGE OF USERS" image. Click a
selected action in the menu to perform the action for the
selected Users.
Random User Code Generation
Random User Codes may be generated for one or many
Users. (Note: To avoid User Number conflicts, it is rec-
ommended to first assign specific User Codes to Users
before selecting random User Code generation). To
generate random Codes for multiple users, press and
hold the CTRL key, click the right arrow ("") located to
the left of the User Name to select each User(s), then
right-click and select "Generate Selected New Codes".
You can select a range of Users (as described above)
and click Generate All New Codes to create new codes
for all Users.
Administrative Users
The Add Administrative Users button displays the Ad-
ministrative Users screen. Administrative Users are the
same for all locks within an Account. Enter information
the same way as if adding a basic User.
3. Discover new Gateways.
4. Add ("Assign") the Gateway to an Account
Note that steps 3 and 4 are listed together because
these two tasks can be performed with one button, as
you will see.
Upon clicking the GW Confg button, a popup appears:
(if this popup does not appear, skip to the section "Using
the Gateway Configuration Screen").
This popup appears because there must be a way for
DL-Windows to differentiate between separate wireless
Accounts. For example, if a large office building has one
company on the 15th floor and another company on the
16th floor, radio signals can overlap from these two
separate Accounts. How does DL-Windows prevent this
confusion between wireless signals? The answer is to
require a unique "Security Password" for each Account
that contains wireless locks, and to embed that password
within the radio transmissions. (Click OK to close this
popup).
On the DL-Windows main screen, click Tools, Set Secu-
rity Password, and the Set Security Password dialog
appears:
Important: Do NOT share passwords between Ac-
counts, otherwise the radio signals can become inter-
mixed! Be sure you record--in writing--all Account pass-
words in a safe location; once set, passwords are NOT
SET SECURITY PASSWORD DIALOG
Configuring DL-Windows for Wireless Lock Use (cont'd)
To highlight a range of
Users, click in this column
to select the first User,
press and hold the SHIFT
key, then click the last
User in the range…
...then right-
click and select
from any of
these options.
SELECT A RANGE OF USERS
SETTING ADMINISTRATIVE USERS
Zobrazit stránku 16
1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 67 68

Komentáře k této Příručce

Žádné komentáře