Alarm Lock ETPLN Uživatelská příručka stáhnout pdf (Strana 46)

46 DL-WINDOWS™ for Trilogy Networx™ V4.0 USER'S GUIDE

Actions > Replace Gateway with new one

To open this screen, click the GW Confg button to open the Gateway Configuration screen. Click to

highlight a specific Gateway in the list, then click Actions, Replace Gateway with new one.

This option is used when a working Gateway device

(discovered on the network, assigned to an Account and

operational with physical locks assigned) becomes faulty

and needs to be physically replaced.

Before replacing the Gateway device (or devices), be sure

you check the network and the Gateway connections out-

lined in the Actions, Relocate Gateways (Displayed in

red) on the previous page.

Physically replace the Gateway device by disconnecting

the power wires and the RJ-45 plug from the old device and

reconnecting all wires to the new device. Remember to

press the "RESET" button on the new Gateway PC board to

clear the Gateway memory (turn to page 25 and follow the

"Resetting the Gateway" instructions for a "Full Reset").

Open DL-Windows and proceed as follows:

1. Click the GW Confg button to open the Gateway

Configuration screen. The following screen ap-

pears:

You can click Yes and have the system automatically

re-locate the new Gateway; in this example we will

try to locate the Gateway manually. Therefore, click

No and the Gateway Configuration screen will

open.

2. In the Gateway Configuration screen, click to high-

light the red-colored Gateway in the list correspond-

ing to the physically replaced Gateway device. Click

Actions, Replace Gateway with new one.

Note: The Gateway Configuration screen auto-

matically highlights the first listed Gateway, thus its

red-colored text may not immediately be apparent;

click to highlight another Gateway or empty row to

view the color of the text.

3. DL-Windows will try to discover the newly installed

Gateway device on the network. If the system is un-

able to find the new Gateway, a popup will appear

indicating that no new Gateways were found. If this

popup appears, click OK to close the popup and re-

peat step 2.

4. If the system finds the newly installed Gateway, the

New Gateways dialog appears, indicating the MAC

address, IP address and the firmware version of the

newly installed Gateway device:

5. Click the check box to select the Gateway and click

OK. The system will automatically replace the old

Gateway with the new Gateway, copying all needed

information (lock table, etc.) into the new Gateway

device.

IMPORTANT: Be sure to remove power from the old Gate-

way.

1 2 ... 41 42 43 44 45 46 47 48 49 50 51 ... 67 68

Komentáře k této Příručce

Žádné komentáře

Alarm Lock ETPLN Uživatelská příručka Strana 46

Komentáře k této Příručce

Související produkty a manuály pro Bezpečnostní systémy pro řízení přístupu Alarm Lock ETPLN