Alarm Lock ETPLN Uživatelská příručka stáhnout pdf (Strana 23)

DL-WINDOWS™ for Trilogy Networx™ V4.0 USER'S GUIDE 23

Add the newly discovered lock serial number to the Gate-

way by clicking the check box next to the lock. Click the

Use Selected Locks button.

A Link Locks popup appears asking if you want to link

your new locks now (if the popup does not appear, click

Tools, Link / Unlink Lock Profiles. Click Yes to open

the Link / Unlink Lock Profiles screen.

In the "Available Lock Profiles" field, click the Profile

assigned to the lock that is being replaced, and click the

serial number of the newly installed lock in the

"Available Lock(s) By Serial Number" field.

After linking, a Send Profile to Lock Now popup auto-

matically appears requesting if you wish to send the lock

Profiles to the physical lock (if the Send Profile to Lock

Now popup does not appear, go to the DL-Windows

main screen, click to highlight the lock Profile, then click

the Comm button and click Communicate with current

Network lock). The DL-Windows Network Lock

Comm Screen opens. Check "All" and click the Start

Communication button. When communication is com-

plete, click the Close button.

I moved a lock from one door to another door,

but now the lock is out of range of its Gate-

way...what do I do?

This procedure can be described as simply deleting a

lock from its existing Gateway and re-discovering the

lock on another Gateway (within range of the lock's new

location).

If you need to install and add a new Gateway to the sys-

tem, see "Adding a new Gateway to an existing sys-

tem" further in this section.

First, delete the lock serial number from the Gateway to

which it is currently assigned. The yellow Lock ID Card

with the lock's serial number can be used for operations

of this kind. In the Gateway Configuration screen,

click Tools, Delete Locks by Serial Number. In the

Delete Serial Number(s) screen, check the serial num-

ber of the lock (the lock that was moved from one door

to another), then click the Delete Selected Serial Num-

ber(s) button.

Next, re-discover the lock serial number on another

Gateway. Click the GW Confg button to open the Gate-

way Configuration screen. Click to highlight a Gate-

way in the list that is closer to the lock's new location,

then click Actions, Discover Locks on Selected Gate-

way.

A popup screen entitled "Discovered 1 Locks" will ap-

pear, indicating the serial number of the re-discovered

lock, its signal strength and lock model.

Add the re-discovered lock serial number to the Gateway

by clicking the check box next to the lock. Click the Use

Selected Locks button.

A Link Locks popup appears asking if you want to link

your new locks now (if the popup does not appear, click

Tools, Link / Unlink Lock Profiles. Click Yes to open

the Link / Unlink Lock Profiles screen.

In the "Available Lock Profiles" field, click the Profile

previously assigned to the lock that was re-discovered,

and click the serial number of this lock in the "Available

Lock(s) By Serial Number" field.

After linking, a Send Profile to Lock Now popup auto-

matically appears requesting if you wish to send the lock

Profiles to the physical lock (if the Send Profile to Lock

Now popup does not appear, go to the DL-Windows

main screen, click to highlight the lock Profile, then click

the Comm button and click Communicate with current

Network lock). The DL-Windows Network Lock

Comm Screen opens. Check "All" and click the Start

Communication button. When communication is com-

plete, click the Close button.

ADDING NEW HARDWARE

I just finished installing a new wireless lock

on a door. How do I add this new wireless

lock to my existing wireless system?

In theory, after installing the lock on the door, you would

want to use a Gateway in the system that is physically

closest to the new lock installation; the closer the Gate-

way, the better the radio signal between the lock and the

Gateway.

To ensure you select the "closest" Gateway, it is useful

to make note of all Gateway locations in the system.

But if you do not know which Gateway is closest, you

can discover the lock on each Gateway in turn, writing

down the reported signal strength to each Gateway,

then compare all signal strengths and select the Gate-

way with the strongest signal.

We recommend that when installing the lock on the door

a yellow-colored "Lock ID Card" be completed; the infor-

mation on this card makes it easier when adding new

locks to the system.

For an existing Account, start by creating a new lock

Profile to which this new hardware will eventually be

linked, :

1. Create new virtual lock Profile

Open the DL-Windows. In the main screen, click the

Open button and the Account "white space" opens at

the left, listing all Accounts. Double-click the Account

name into which you want to add this new lock, dis-

playing all lock Profiles in the Account. Notice the

Account name is highlighted in blue. Right-click the

Account name, opening the right-click menu, and

click New Lock(s) Profile. The New Lock Profile

dialog opens.

In the New Lock Profile dialog, type a description of

Normal Tasks (cont'd)

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 67 68

Komentáře k této Příručce

Žádné komentáře

Alarm Lock ETPLN Uživatelská příručka Strana 23

Komentáře k této Příručce

Související produkty a manuály pro Bezpečnostní systémy pro řízení přístupu Alarm Lock ETPLN