Alarm Lock ETPLN Uživatelská příručka Strana 52

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 68
  • Tabulka s obsahem
  • ŘEŠENÍ PROBLÉMŮ
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 51
52 DL-WINDOWS™ for Trilogy Networx™ V4.0 USER'S GUIDE
IMPORTANT: Threats such as fire emergen-
cies, bomb threats or the release of hazardous
substances within a protected premises may re-
quire an "Emergency Passage" Command to al-
low for a facility evacuation.
Other threats such as terrorist attacks, hostile in-
truder situations, the outdoor release of hazard-
ous substances, tornado emergencies and other
life-threatening events, may require an
"Emergency Lock Down" - the opposite of a facil-
ity evacuation.
It is strongly advised that all facilities develop
separate Emergency Lock Down and Emer-
gency Passage procedures appropriate for the
specific premises, and these Emergency proce-
dures be frequently practiced and continually re-
fined.
Wireless Commands > Emergency Passage
The Emergency Passage wireless Command unlocks all
wireless physical locks within the current Account, allowing
"passage" through the door.
An Emergency Passage Command sent to a lock in either
Normal mode or in Emergency Lock Down mode over-
rides either existing mode and places the lock in Emer-
gency Passage mode.
IMPORTANT: Once in Emergency Passage mode, the
wireless physical lock(s) may be taken out of Passage
mode manually (using the Function 49 keypad Command).
In addition, when the lock is in an "Emergency" state, all
User Codes are disabled at the keypad except for User
Code #1 (the Master Code) and User Codes 2 through 9
(assuming the "Users are disabled during Lockdown"
check box in the Programmable Features screen, Op-
tions tab is checked).
Emergency View Screen
Click Wireless Commands, Emergency Passage and the
DL-Windows main screen flashes a yellow and red
"Passage" warning located to the right of the Help button.
The Emergency View screen appears, displaying all Gate-
ways in the current Account, their descriptions (names and
IP addresses) and current (real-time) status. As the Gate-
ways process the Passage Command, the Status column
indicates "Waiting for verification...". Note the bottom of
the Emergency View screen displays the IP address of the
processing Gateway and the processing time of the Com-
mand, in seconds. All unverifiable requests timeout in 140
seconds.
When all locks in the Gateway are confirmed as unlocked,
the Status column turns green, reading "All Locks in Pas-
sage".
Unable to verify all locks
Note: If some or all locks in the Gateway cannot be con-
firmed as unlocked via the wireless signal, the Status col-
umn turns yellow, reading "Unable to verify all locks".
Although these physical locks may indeed be unlocked, to
On the DL-Windows main screen, click Wireless Commands, Emergency
Passage to unlock all wireless locks in the current Account.
view the locks that are unable to be wirelessly verified as
unlocked, proceed as follows:
1. Click the GW Confg button to open the Gateway
Configuration screen.
2. Click to highlight a specific Gateway in the list.
3. Click Tools, View Gateway's Lock Table. The Lock
Status column clearly indicates which lock(s) are un-
verifiable.
DL-WINDOWS MAIN SCREEN, WIRELESS COMMANDS MENU
Zobrazit stránku 51
1 2 ... 47 48 49 50 51 52 53 54 55 56 57 ... 67 68

Komentáře k této Příručce

Žádné komentáře